Part 1 Questions 1-14
The best ice cream makers
Have you ever considered making ice cream at home but thought it would be too complicated? Here is a selection of machines that could change your mind
- AMagimix Gelato Expert
- If you're an ice cream fanatic, it doesn't get better than this. It's quick, taking as little as 20 minutes, and consistent in its results, while the three automated programmes are very easy to use and it has an unusually generous two-litre capacity. On the other hand, we found it noisier than many, and the ice cream is softer than we might have liked.
- BShake n Make Ice Cream Maker
- If you want to make some basic soft ice cream, this is a fun little gadget that gets decent results. You add a little ice and salt to the base, then your ingredients to the stainless-steel tub, pop the lid on and give it a good shake for at least three minutes. Provided you measure everything exactly and shake back and forth consistently, it's surprisingly efficient.
- CSage Smart Scoop
- This is a seriously smart machine. Our favourite feature is the built-in sensor that works out whether the consistency of your ice cream or frozen yoghurt is right for you (from the 12 hardness settings) so that it can stop mixing when it's ready, alerting you with a fun tune. As you'd expect from the considerable price tag, there's a built-in freezer and it feels beautifully engineered.
- DLakeland Digital Ice Cream Maker
- You simply pop on the lid and pour in the ingredients, then set the timer using the nice, clear digital display. Some customers reportedly struggled to disassemble it in order to wash the bowl and paddle, but we didn't have that problem. We're also giving it extra points for the recipe book, which has some really tasty ideas.
- EJudge Ice Cream Maker
- We had a few criticisms, perhaps not surprisingly when you consider this is one of the cheapest models in our selection - notably the fact that the paddle isn't as robust as the ones in other models. We'd have liked more recipes, too. But, for a budget machine, this is a bargain.
- FKitchenAid Artisan Ice Cream Maker
- If you own a KitchenAid food mixer, this attachment (one of 15 that fits this machine) is a good way to start ice cream making. You simply freeze the bowl before use and attach it to the mixer (a quick and easy job) and pour in your favourite fresh ingredients, with some recipes taking just 20 minutes.
Questions 1 – 7
Look at the six advertisements for ice cream makers, A-F. For which ice cream maker are the following statements true? Choose the correct letter, A-F.
NB You may use any letter more than once
- Users of this machine will need to put some physical effort into making ice cream.
- Users of this machine can decide how soft they want their ice cream to be.
- This ice cream maker can be fixed onto an existing kitchen appliance.
- It is possible to make a larger amount of ice cream at one time than in most other machines.
- This machine has features that make it worth the high price.
- People might find it difficult to take this machine apart.
- This machine makes an enjoyable sound when the ice cream is prepared.
Part 1 Questions 1-14
Photography weekend course on the coast of Cornwall
- Our three-night photography weekend is designed to appeal to all levels. Participants will be able to enjoy some of the fantastic locations on this beautiful coastline, with its ever-changing light, while staying in a comfortable hotel and enjoying some typical dishes of this south-western region of Britain.
- Price includes: Personal daily tuition, discussions, welcome reception, and dinner, bed and breakfast for three nights in a twin or double room.
- Price does not include: Insurance and photographic equipment plus transport to photographic venues. Participants are required to arrange this. Car share during the weekend is a popular option.
- Course information
- Our courses are relaxed but comprehensive, and the content is largely dictated by those attending. Included within the sessions are editing workshops at the hotel and photo shoots down by the sea. Visits further away are also undertaken to experiment with different landscapes.
- Arrival by mid-afternoon on the first day will allow you to check into the hotel and enjoy some Cornish refreshments before heading out into the fresh air for our first shoot together at sunset. Dinner and a good night's sleep and you'll be ready to start at sunrise the next day. In the evenings you will have a chance to unwind at the hotel, share your thoughts on the day and spend time looking at images and sharing editing techniques.
- Maximum numbers: Four photographers per course.
- The following equipment is essential: A digital SLR or bridge camera with its instruction manual, batteries and charger; memory cards; comfortable walking footwear with good grip; warm outdoor clothing and waterproofs.
- Recommended equipment: A tripod, filters, a laptop with editing software and charger.
Questions 8 – 14
Choose TRUE if the statement agrees with the information given in the text, choose FALSE if the statement contradicts the information given in the text, or choose NOT GIVEN if there is no information on this.
- The course is aimed at people who are already skilled photographers.
- Three meals a day are included in the course fee.
- The only way to reach the hotel is by car.
- The topics covered on the course depend mainly on the wishes of the participants.
- Participants are expected to gel up early on their first morning to take photographs.
- The tutor will show participants examples of her work after dinner.
- Participants should be prepared for bad weather.
Part 2 Questions 15 – 27
Respiratory Protective Equipment - advice for factory employees
- You need to wear Respiratory Protective Equipment (RPE) when you're doing work where you could breathe in hazardous substances in the air such as dust, vapour or gas. Common health effects from breathing hazardous substances include sore eyes and headaches. Make sure you are using the right RPE for the task. For example, negative pressure respirators should not be used in low oxygen environments.
- Some types of RPE must have a tight seal around the facial area to be effective. Your employer will arrange a yearly facial fit test to ensure that you are given RPE that fits properly. This checks that the seal between the respirator and the facial area is secure, by releasing a substance that you can smell or taste if the RPE is not working properly. RPE will only provide effective protection if you are clean shaven. Facial hair growth makes it almost impossible to get a good seal so, if you have a beard, you should talk to your employer about other forms of RPE that do not rely on a tight facial fit. Jewellery and long hair can also compromise an effective fit.
- Using your RPE
- You should complete a visual check of your RPE for signs of damage before you use it. If you are using RPE that requires a tight fit, you must check it fits properly before entering a hazardous area.
- Cleaning your RPE
- Wash and dry your RPE after using it. Use a mild detergent, as harsh products such as solvents can cause damage. Use a brush and warm water and rinse with clean water. This will remove excess detergent that can cause skin irritation. Dry your RPE on a solid wooden rack or suspend from a clothes line.
- Maintaining your RPE
- Inspect your RPE after each use and during cleaning. Make sure you check the straps for breaks, tears, fraying edges and deterioration of elasticity. Check the inhalation and exhalation valves are working and not damaged.
- Storing your RPE
- Improper storage can cause distortion to your RPE. Store your RPE in a clean, dry place, away from dust, oil and sunlight. RPE should be stored so that it doesn't get crushed.
Questions 15 – 21
Complete the sentences. Write ONE WORD from the text in each gap.
- Some respirators are unsuitable for use in areas with limited levels of .
- Facial fit tests should be conducted on a basis.
- For workers who have a , an alternative to tight-fitting RPE may be required.
- Workers should avoid cleaning their RPE with .
- RPE can either be hung up or placed on a timber in order to dry it.
- It is important to ensure that the RPE are not ripped and can still stretch.
- RPE should not be exposed to direct when it is being stored.
Part 2 Questions 22 – 27
Working with cows in a dairy Guidelines for employers
- Slips and trips
- Slips and trips are one of the most common accidents when working in farm dairies. They often happen when working with cows in a dairy during milking, and during maintenance and cleaning.
- The following three hazards make it more likely chat employees will slip or trip:
- Surfaces which are wet or dirty
- Have a system for cleaning up milk, oil, cleaning Auid and grain spills as soon as they happen, and make sure it is followed.
- install non-slip mars in wee work areas and make sure chat footwear is slip-resistant.
- Obstacles such as pipes or cables in the farm dairy
- Reduce tripping accidents by hanging hoses and pipes along walls our of people's way and remove unused firrings, like bolt fasteners in floors.
- Move obstacles from walkways and entrances where possible. Tripping hazards which cannot be removed should be clearly indicated with yellow tape. If there are obstacles overhead, these should be wrapped in padding to avoid risk of injury.
- Steps which are too high or not deep enough, or steps in poorly lit areas
- Build steps properly and use non-slip surfaces
- Handrails should also be fined.
- The provision of good lighting can also help co reduce the risk of injury.
- Lifting and carrying
- The following casks pose risks to dairy workers:
- lifting buckets of grain, water and milk
- lifting calves.
- Managing the hazards
- Balance the load by using two buckets, one in each hand.
- Where possible, use trolleys and other mechanical aids to replace manual tasks.
- Milking by hand
- Specific tasks in milking which cause injury are:
- bending in an awkward position
- putting on and removing milking equipment from cows.
- Managing the hazards
- Think about designing or changing the milking area so workers can change the height they are working at to suit them. Ensure that all equipment needed is close by to avoid workers having to overreach or adopt a bending position.
- Alternate between jobs to reduce repetitious manual handling tasks, including a rotation between putting on and removing milking equipment.
Questions 22 – 27
Complete the table below. Write ONE WORD ONLY in each gap.
|Managing the hazard
|Slips and trips
Slippery floor surfaces
Hoses and pipes
Remove solid spills such as grain immediately.
Ensure all items of have good grip.
Ensure they are fitted to walls where possible.
Highlight obstructions with brightly coloured tape.
Ensure they are covered with .
Provide good lighting and install .
|Lifting and carrying
Transporting containers and calves
Spread the weight evenly between both hands.
Try to avoid moving containers by hand, and use equipment such as instead.
|Milking by hand
Repetitive handling of milking equipment
Keep everything accessible so that employees don't need to bend or .
Introduce a system of to increase variety.
Part 3 Questions 28 – 40
Night photography in autumn
- ANovember in the northern hemisphere is not the most inspiring of months for the photographer. The days shorten appreciably as winter approaches and the last autumn leaves are blown free by high winds and frequent rain. Nature seems dormant, as many birds have long since flown to warmer climates, fungi break through the earth, and many animal species sleep until spring's warm awakening.
- It would seem a good time also to put the camera to bed and forget about photography until the first snowfall. Well, not quite. With the days being shorter and daylight less bright, November is an excellent month to turn your attention to what can be found in the long darkness from dusk to dawn. In the nocturnal hours a vast number of life forms still thrive, and provide a completely different set of subjects to those the daylight hours present.
- BAs the most noticeable object in the night sky, the moon is an obvious subject when making your initial attempts at night photography. The timing of an evening moonrise is important to know because, not only does it vary according to the time of year, but the moon always appears largest at this point, when it is closest to the horizon. To capture the moon at its brilliant best, you need a bit of luck too: a time when its brightest phase - a full moon - coincides with the ideal weather forecast of a cloudless night sky. The moon is not a direct light source such as the sun or the stars; instead it is reflecting the light of the sun hitting its surface. On such a night, a full moon will reflect only about ten percent of the sunlight, but that is still enough to illuminate buildings, trees, bridges and other landscape features.
- CWith today's cameras, far greater detail can be rendered. Whole constellations consisting of thousands of points of starlight filling the frame and even galaxies such as our own Milky Way can be captured. This is a type of night photography for which few of us had suitable equipment a decade ago, but now it has become accessible to all photographers, thanks to the much improved, affordable technology.
- However, photographers choosing to shoot the moon may be less concerned by this, as they tend to prefer to use telephoto lenses to magnify the size of the moon, particularly when it is low in the sky and can be shown in relation to a landmark or recognisable structure within the frame.
- DOf course, the nocturnal world offers other subjects closer to the ground, some that are even familiar to us by day. As cities and towns spread further into our green spaces, some wild animals move further afield to escape our intrusions, while others adapt to their new urbanised surroundings.
- In European cities, sightings of foxes at night are increasingly common, as they thrive thanks to the cover of darkness and a ready supply of residents' waste bins, which they use as feeding stations. Deer and wild boar are larger mammals that have also adapted to the urban fringes in recent years, emerging from the cover of parks and nearby forests to forage in residential gardens by night.
- ESuch is the proliferation of urban wildlife that some photographers now specialise in documenting the nocturnal animals that have developed a taste for city nightlife. The improvement in camera technology that has made night sky images more accessible has also extended the creative repertoire of the wildlife photographer. It is now possible to photograph some wild species at night, or soon after dusk, without having to always resort to the use of specialist equipment.
- More exciting still is how the techniques of astro-photography and the wildlife camera-trap have combined in recent years, to produce images of nocturnal animals against a background of a star-studded night sky. This marriage of two photographic genres has created an innovative style of night photography.
- FIf that all sounds a bit too complex and time-consuming, with too many variables to spoil the hoped-for result, then consider using the fading light of the night sky in the brief time after dusk in a more opportunistic manner. Dusk is the part of the nocturnal phase when the light of the sun is still visible, though the sun itself has disappeared completely. During the earliest phase of dusk there is enough ambient light remaining to enable features in our surroundings to be seen without the aid of artificial light sources such as floodlights or street lamps.
- GWhile many of us shoot sunsets, the period of dusk also provides an opportunity to use the ambient light low in the sky as a backdrop to photographing foreground subjects in varying stages of illumination, or even as shadowy outlines against the fading sky. The variety of possible subjects includes ships at sea, flocks of low-flying birds, trees, windmills, skyscrapers and high bridges. These are all well known by day, but against a night sky at dusk they lack colour, so any compositional strength is determined by the graphic appeal of their distinct and recognisable shapes.
Questions 28 – 34
Choose the correct number, i–viii, of heading for paragraphs A–G from the list of headings below.
List of Headings
- iHow chance contributes to conditions being right
- iiConcern about the changing environment
- iiiThe process of photographing animals at night is getting easier
- ivHow human developments are affecting wildlife
- vPhotographing objects that can't be seen in detail
- viA season that may seem unsuitable for photographers
- viiNo longer too expensive
- viiiA less ambitious approach
- Section A
- Section B
- Section C
- Section D
- Section E
- Section F
- Section G
Questions 35 – 40
Complete the sentences below. Write ONE WORD ONLY from the passage in each gap.
- November is a time when grow.
- The apparent size of the moon depends on its position in relation to the .
- Sunlight is reflected by the of the moon.
- When the night sky is clear, many objects in the , e.g., buildings, are visible
- With modern cameras, it is possible to photograph not only constellations but also .
- Deer and wild boar may search for food in in towns.